Navigation
Records in this category
- NK50V does not load disc and Epson Printer Status Monitor Windows shows “CD/DVD tray not set correctly”
- How to cancel the current printing job
- How to continue printing after the disc loader run out of discs
- How to replace Epson printer cartridge and resume printing
- MyNK50V can’t detect or activate NK50V
- Epson printer shows error on indicators or error status window
- Disc caddy gets stuck between NK50V and Epson printer
- Discs does not slide out of the output ramp from NK50V
- Jammed disc loader or it loads more than one disc at a time
- Loud noise from NK50V when disc caddy is moving
- NK50V shows error by flashing-red indicator
Tags
PC-Connected » Nimbie Sidekick NK50V
ID #
MyNK50V can’t detect or activate NK50V
• Make sure Epson printer is ready (the LED indicator lights up steady-green).
• Make sure NK50V is ready (the LED indicator lights up steady-green).
• Make sure USB cables are correctly connected among NK50V, Epson printer
and PC.
• Make sure the disk loader is attached on NK50V and the loader cable is
correctly connected.
• Remove NK50V from Epson printer. Manually print a few discs to make sure
printer software is successfully installed.
• Remove NK50V from Epson printer. Refer to Replace Disc Caddy section to
make sure NK50V and its device driver are successfully installed.
Tags: MultiNK50V, MyNK50V, Nimbie Sidekick, NK50V
Related entries:
- MyNK50V can’t detect or activate NK50V
- Disc caddy gets stuck between NK50V and Epson printer
- Disc caddy gets stuck between NK50V and Epson printer
- Disc caddy gets stuck between NK50V and Epson printer
- MultiNK50V can’t detect or activate NK50V
Author: Acronova Tech Support
Revision: 1.0
You cannot comment on this entry